Homebrew setup
This is a step-by-step guide of how to install the Homebrew Channel on your Wii console. The methods described in this tutorial covers the Smash Stack, Yu-Gi-OWNED!, Bathaxx, Return of the Jodi, Indiana Pwns, Eri HaKawai and Letterbomb exploits as these are the only methods working for 4.3; other methods of installing the Homebrew Channel for users with older System Menus are Bannerbomb and Twilight Hack.
This tutorial applies to versions of the Wii System Menu ranging from 3.0 to 4.3. Older Korean Wiis can use Bannerbomb . The latest version of Wii System Menu is 4.3, therefore, this method should work for ALL USA, Japanese, Korean and PAL Wiis.

Smash Stack requires a copy of Super Smash Bros Brawl, and will work on all wiis. Indiana Pwns requires a copy of Lego Indiana Jones: The Original Adventures, and will work for NTSC-U, NTSC-J and PAL Wiis. Yu-Gi-OWNED! requires a copy of Yu-Gi-Oh 5D's Wheelie Breakers, it will only work on PAL Wiis. For NTSC-U and NTSC-J use Yu-Gi-Vah. Bathaxx requires a copy of LEGO Batman, and will work for NTSC-U, NTSC-J and PAL Wiis. Return of the Jodi requires a copy of the original Lego Star Wars game or the newer (1.01) release (NTSC or PAL). Eri HaKawai requires a copy of Tales of Symphonia: Dawn of the New World, and will work for NTSC-U, NTSC-J and PAL Wiis. Letterbomb requires no game, and will work with any 4.3 wii.

About the Homebrew Channel

The Homebrew Channel is a self-updating application created by Team Twiizers, which allows users to easily load and use homebrew applications, without having to use exploits such as Bannerbomb or Twilight Hack every time they run a new application. After installation, the channel is accessible from the Wii Menu just like any other Wii channel. The channel can be deleted at any time through the Wii's "Data Management" menu. The Homebrew Channel does not show up in the console's play logs, however this does not affect the Wii in any way whatsoever.
Setting up Homebrew Channel

What is needed
A Wii console
An SD card (Sandisk 2GB is a good choice)
Note: SDHC cards can only be used by the Letterbomb exploit. Otherwise you must have an SD card that is 2GB or less.
The HackMii installer
An exploit that matches your wii's version (and the game required to launch it, if necessary)
A computer (Windows, Linux, or MacOS)
An SD card reader for your computer
Part 1: Preparing the SD Card
(Smash Stack only): If you have any custom stages saved on the Wii (including the default ones), move them to the SD card or delete them. Then rename your private folder to privateold.
If you already have an SD card that is compatible with your Wii, you may be able to put all necessary files alongside the already existing files on your SD card given you have enough room. The Wii directory is called private, and you need to use a folder called private containing Indiana Pwns, Yu-Gi-OWNED!, Bathaxx, Return of the Jodi or Smash Stack to trick your Wii into thinking that it made the file these exploits use.
If you would like, you may rename your current private directory to any name. (I renamed mine privateold) Therefore, when you are finished with the hack, you can delete all hack files and rename privateold back to private to access all of your files again.
If you already have a compatible SD Card that has already been used in your Wii with a renamed private directory, you DO NOT have to format your SD card. Skip to the next step.
If you have a new SD card, or an SD card with no Wii files, it is recommended that you format it using the instructions below.
Important! This process will erase the data on the card and it is therefore recommended that you make a back-up copy of any data you may currently have on your SD card before continuing.
Windows


Open up My Computer.
Right-click on the drive that contains the SD card and select Format....
Under File system make sure you select FAT (see picture to the right).
Click "Start" and let the process finalize.
After the formatting is finished proceed to the next step.
Mac OS
Open up Disk Utility
Find your SD card in the navigation.
Go to the Erase tab.
Change the Volume Format to MS-DOS (FAT).
Click "Erase" and let the process finalize.
After the formatting is finished proceed to the next step.
Linux
Open up a terminal.
Execute the command "mkfs.vfat /dev/<location of your SD card>".
Caution not to reformat your hard disk. Think hard before formatting /dev/sda1, for example.
After the formatting is finished proceed to the next step.
Part 2: Copying files to SD card
1: Ensure that the SD card slider is not in the Lock position.

2: Download Indiana Pwns, [COLOR="#006400"Yu-Gi-OWNED][/COLOR]!, Bathaxx, Return of the Jodi or Smash Stack (make sure you have the correct version for your Wii System Menu) and the HackMii installer.

3: Extract both the exploit and HackMii installer in an easily accessible folder, such as your Desktop (pic. 1).

4: Open up the folder called hackmii_installer_X ( where X relates to your version as shown in pic. 2).

5: Copy file boot.elfB to your SD card (pic. 3).

6: Finally, from the exploit archive, copy the folder called private to your SD card. Your SD card should look like pic. 4.
Contents That Should Be On Your SD Card:
private - Extracted From Indiana Pwns, Yu-Gi-OWNED!, Bathaxx, Return of the Jodi or Smash Stack
boot.elf - Extracted From The Hackmii Installer
(optional) privateold - The Wii's existing files renamed temporarily. (see "Preparing the SD card)

Part 3: Setting up your Wii
In order to install the Homebrew Channel, you must first use an exploit of some kind. Use the chart below to determine what you will need to use:
Exploit Name Game Required USA JPN EUR KOR Compatible with...
Twilight Hack Legend of Zelda: Twilight Princess Yes Yes Yes No System Menu 3.4 or earlier
Bannerbomb None Yes Yes Yes Yes System Menu 4.2 or earlier
Indiana Pwns LEGO Indiana Jones Yes Yes Yes No System Menu 4.3 or earlier
Smash Stack Super Smash Bros. Brawl Yes Yes Yes Yes All firmwares
Yu-Gi-
Yu-Gi-Vah
Yu-Gi-Oh 5D's Wheelie Breakers Yes Yes Yes No System Menu 4.3 or earlier
Bathaxx LEGO Batman Yes Yes Yes No System Menu 4.3 or earlier
Return of the Jodi Lego Star Wars Yes Yes Yes No System Menu 4.3 or earlier
Eri HaKawai Tales of Symphonia Yes Yes Yes No System Menu 4.3 or earlier
LetterBomb None Yes Yes Yes Yes System Menu 4.3

Indiana Pwns
Make sure you have booted Lego Indiana Jones at least once. Otherwise, the hacked save won't copy
Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Indiana Pwns save for your region and copy it to the Wii
Return to the System Menu
Boot Lego Indiana Jones
Load the saved game you just copied to the Wii.
When the game loads, you will be in Barnett College. Walk to the Art Room (through the Courtyard), approach the left character on the podium. When it zooms on him, choose the switch to option (two silhouettes, staggered, with an arrow pointing between them).
boot.elf from your SD card should now load
Smash Stack
Before inserting your SD card, boot the game and go to the stage builder and make sure to erase all the custom sample stages.
Insert SD card into Wii
Boot Super Smash Bros Brawl
Go to the Stage Creator
boot.elf from your SD card should now load
Yu-Gi-OWNED!
Make sure you have booted Yu-Gi-Oh 5D's Wheelie Breakers at least once. Otherwise, the hacked save won't copy.
Put your SD Card in your Wii.
Go into Wii Options -> Data Management -> Save Data -> Wii.
Go to the SD Card and move the Yu-Gi-OWNED! save to your Wii.
Boot Yu-Gi-OH 5D's Wheelie Breakers.
Press and wait until the title menu shows up.
Press and you will see a loading screen. Wait a couple of seconds and your homebrew will be executed.
Bathaxx
Make sure you have booted LEGO Batman at least once. Otherwise, the hacked save won't copy
Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Bathaxx save for your region and copy it to the Wii
Return to the System Menu
Boot LEGO Batman
Load the saved game you just copied to the Wii.
When the game loads, you will be in the batcave, take the elevator on the right side. Then in the trophy room, go to the upper corner and go through the door in order to enter the "Wayne Manor". Now you can select a character. Choose the last enabled one in the lowest row.
boot.elf from your SD card should now load
Return of the Jodi
Make sure you have booted Lego Star Wars at least once. Otherwise, the hacked save won't copy
Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Return of the Jodi save for your region and copy it to the Wii
Return to the System Menu
Boot Lego Star Wars
Load the saved game you just copied to the Wii.
boot.elf from your SD card should now load
Eri Hakawai
Make sure you have booted Tales of Symphonia at least once. Otherwise, the hacked save won't copy
Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Eri HaKawai save for your region and copy it to the Wii
Return to the System Menu
Start the game and load the first save
Press the PLUS button to enter the game menu
Scroll to the STATUS button and press A
Scroll to the monster named "Eri HaKawai" (NTSC version: "Giantpune") and press A
boot.elf from your SD card should now load
Letterbomb
Go to please.hackmii.com
Open your wii and write down your MAC Adress to the boxes.
Download the .zip file and unzip it.
Copy "private" folder and "boot.elf" to your SD Card( Can be SDHC)
Insert SD card to your Wii and go to Wii Messageboard
You should see a red envelope looks like in the "please.hackmii.com". and click it

Part 4: Installing the Homebrew Channel

1: You will be presented with one of the screens below; if you have a new Wii you will only be able to install BootMii as IOS.

2: Select continue.

3:Go to Homebrew Channel > Install the Homebrew Channel. You will be asked whether you want to install the channel; select yes. After installation you should get a message "finished" and return you to the initial menu.

4:If possible, install BootMii as boot2; if not install it as an IOS.
**********

Running Bootmii Through HBC

If you're one of the late-comers to the Wii party you may have had to install BootMii via IOS. In that case you have to run BootMii by going into The HBC and hit the "Home" button on your Wii Remote. Place your cursor onto the "Launch BootMii" selection and press A.
***************
Extra Note
While in BootMii, you should back up your NAND memory. This is mainly for those who have installed bootmii as Boot2, but should still be done when installed as IOS. When in BootMii, you will not have access to the wii-mote, so you will have to use a gamecube controller, or the buttons on the Wii itself. (power button is move cursor, reset button is select option.) THIS ONLY APPLIES TO THE BOOTMII APPLICATION ITSELF, THE HACKMII INSTALLER DOES SUPPORT THE WIIMOTE.
Select the 4th option then hit A/Reset, then you are taken to a new option.
The first corresponds to the backing up of NAND memory, the second; "injecting" NAND back into memory...
Select the first option (you must have at least 512MB of space on SD card to do so) to back up NAND.
Troubleshooting

When I insert my SD card to start the process nothing happens!
One of 4 things has happened:
You didn't place the data on the SD card right.
You went into the save game data menu instead of the channel menu.
You need to set the archive bit of the private\wii\title\aktn\content.bin.
You need the next bannerbomb zip. Download the next one and start over.
OMG!! One of the selections is purple and says I can't install BootMii!!
You haven't read this page in detail, this is explained further up with a picture of the screen.
My Wiimote quit working when i loaded up BootMii! Why? and Can this be fixed?
You didn't read BootMii's FAQ or the README file located in the Hackmii installer archive.
Both state that you have to use a Gamecube controller or the Power/Reset/Eject buttons on the console. In order for this to be fixed a lot of coding will have to be done to make a custom Bluetooth stack and drivers for BootMii. This isn't on the top of the priority list.
I get Error -2 trying to install The Homebrew Channel or DVDx and Error -1 trying to install BootMii
Your SD card slider is in the Lock position, so it is read only.
Will my Wavebird wireless controller work?
Yes, but you must hold any (unused) button when you start up your Wii.
(Wavebird wireless controller now supported in beta3)
Any other questions should be directed to the WiiBrew:FAQ. I'm human after all and can't remember every question that is asked but will update as necessary
*************

If everything went as planned you should have everything installed and should select "exit" and your Wii will load into the Homebrew Channel, Or into the system menu with The Homebrew Channel on the menu.
Notes

^B* The other three files contain information that made the creation of this tutorial possible but are not needed in the actual installation and use of the HackMii installer.

^C* Once you press A on your Wii Remote it will power off and be unusable. You have to use a GameCube controller plugged into slot #1, or the three buttons on the front of the console.

This is bad and incomplete. There's plenty more to consider before just blindly following a random tutorial, for instance system menu & region. How about the homebrew channel, and wad installation? What if you brick without a nand backup? I just can't recommend this tutorial to anyone, nothing personal post101.

man this is a basic tutorial, the rest will follow.

This tutorial is tried and tested by myself and works 100%

Oh, and system version is covered in the above post, region does not matter one little bit when jailbreaking the Wii, region relates to games man

Originally Posted by Post101

man this is a basic tutorial, the rest will follow.

Sorry, I didn't know there were plans to update it.

Originally Posted by Post101

This tutorial is tried and tested by myself and works 100%

Oh, and system version is covered in the above post, region does not matter one little bit when jailbreaking the Wii, region relates to games man

I never said this method didn't work, post101. Only that there were a lot of other things that should be considered, like region for example. Even though region doesn't matter when you're jailbreaking a virgin wii, region must still be known when considering for example, a region change. And the possibility the display of the region you change to isn't supported by your TV, like PAL or NTSC.

All I'm saying is when hacking consoles you're looking to remove the limitations, right? But to add extra functionality for the wii there's much more to it than just breaking into it. That extra functionality is found in the modpack that should be used. Which as you might guess, also depends on the region of your wii. See?

very good guides post hope to see some more as very useful info for anyone wanting to learn how its done i done my wii console few years back was so simple after following a similar guide of what you and attic have said

As you know there's a lot of stuff that comes after this jailbreak, too much to post all in one thread!
So it needs to be broken down into parts that members can understand with links to the next topic.

I have updated the thread with more info, I will be cleaning it up a bit and adding some pics shortly.

its simple these days... letterbomb using SD card install HBC & hack mii from the files given from letterbomb , grab gsx uploader, add your wbfs to hardrive (WBFS manager 3.0) and away you go

Oh, I understand you because I remember the first time I bought aug skins . It was so unusual for me. Before that, I received skins only during the game, but, unfortunately, it isn't always possible to get what I need for a complete set. While on this page with skins I can find everything I need and what I want.